1998 Chrysler Concorde "crank sensor" Questions

...but wouldn't start. I have replaced the crank sensor and the cam sensor but it still won't start. What do I try next? hello im josh have you tested for fuel pressure where is the crank sensor ...

...crank sensor and cam sensor twice and still throws cam and crank code any one run into this??? What's the code ? P0016 Crank/Camshaft Mis-align/sync. How many miles on the vehicle ? Ever have timing ...

...crank sensor maybe the culprit. What are the differences between crank sensor and crankshaft position sensor? I need to try to fix this car so my daughter can have the our other car as hers. Please ...

or something to show? the cam sensor is located on top of the engine in the front of the left side valve cover. the crank sensor is located on the right side of the engine block just above the starter

...crank sensor this is the sensor most likely to cause this not the cam sensor. To get to the crank sensor you will have to jack up the passager side of the car and the sensor is located on the ...

sensor changed coil pack.when turning key car cranks over no power to coil fuel pump etc. fuses and relays under dash and hood are ok change crank sensor? if so replace control module (ignition module

engine crank but fails to start? i check fuel pump and coil not functioning you may have a bad crank sensor and or cam sensor

sensor. Crank the engine and check for the code again. If the logic module saw a signal, the code will be cleared. This code will not show up if the sensor simply fails. The logic module must be reset

...so it's not the battery, not the cam sensor as it's been replaced and not the crank sensor as it has also been replaced. We don't dare take it anywhere anymore. Can you help? Check the fuel

shut off at times while driving, but will crank back up. need to get the engine light off to get inspected. from your decsription it sounds like a bad crank sensor replace it then clear the codes