1991 Acura NSX "clutch pedal falls floor" Questions

clutch pedal floppy 1991 nsx suddenly clutch became floppy and fell to the floor. gears won't change. fluid levels ok. engine runs ok no warning lights. had to be towed. 40,000 miles on car, no mods. ...

...clutch pedal goes to floor, no tension, do I have to replace entire clutch? what is the actuator? hydralic clutch, never slipped prior until one day went to shift, clutch pedal never came back up, it ...

clutch pedal falls to the floor when towing then returns to normal after a couple of days when not towing. I have a 2012 PX Ranger;3.2 6-speed manual. When towing my boat (1.8 tonne) after approx. 1.5

...clutch pedal is not working. falls right to the floor. have to drive by hard-shifting. in my '88 audi 90 quattro The pedal falls right to the floor. I have to hard shift when driving, the pedal ...

...clutch pedal to my 1997 ford escort lx sport suddenly fall down to the floor but if I pull it up with my foot it only let's me change gears then falls back down? Hi, it sounds like your master clutch ...

clutch pedal falls to floor and does not disengage clutch the clutch fluid maybe low or you may have a bad clutch slave or master cylinder You could have blown a hydraulic line check your hoses then ...

...Clutch pedal falls to floor. Start motor, all OK. Now start engine, lift pedal a fraction (2-3mm) - car jolts forward - I Brake, engine stalls. I cannot drive it. Please advise what is wrong? I have ...

...clutch pedal is to the floor and can be pulled up with my foot and then falls right back to the floor.. Can someone please tell me what might be wrong..?? sound you have a blown clutch slave ...

clutch problems w 2005 sunfire pedal falls right to the floor when depressed Check fluid level of hydraulic clutch that would cause this condition if low in fluid or not bled of air.

Replaced slave cylinder on clutch but clutch pedal falls to floor and does not come back up Bleed the slave again