Sony SELECT KDF60XBR950 Rear Projection Television Replacement Lamp RPTV "turn sound back" Questions

...turn it back on and there was a blank screen, no sound and a chirping sound from the back. what is your expert opiion? michelle A chirping sound usually means that one of the secondary supplies has ...

...it was turn on comes on but then it turns back off. and every now and then the sound will come on and a few seconds later turn back off. rca r52wh73yx5 Replace bulb and clean cooling fans of all

...sound, and have to turn it off and back on to make it work again When watching the tv, it randomly goes snowy and have to turn it off and back on to get the picture back and the sound. Some times it ...

...turn back on shows great for about 5 minutes then clicks off (no picture or sound) with green light still on. Check and make sure your fans are working and there is sufficiant cooling to the back of ...

...sound when I turn it on When I turn on the tv there is no sound. After it being on for about 3 hours the sound begins to come back but in spurts. I find at that point if I continue to turn it off the ...

...turn it on and it powered up normally. The screen and sound came on, but it immediately turned back off and turned back on again. I unplugged it for a few minutes, then plugged it back in. It ...

...turn the tv on a buzzing sound comes from the back panel part #1-488-875-11. when the buzzing sound comes on a little cylinder shaped thing in the back turns on and off with the buzzing sound. the ...

...games on the tv. You have the center sound on in your menu, just turn off the cneter sound option and it will all come back on The TV turns on but turns off immediately. The power light is

back on with sound no picture and turns itself back off showing all three lights (lamp, timer and standby/temp). What's the problem? you may check your lamp first. other than that i would say a faulty

...turn it back on, the picture comes on but no sound. The volume and mute buttons do not work. Does anyone know what the 9 flashes on the power switch is indicating? Any resolutions for this problem? ...