...negative battery terminal and let it sit for at least 15 minutes so the resistors discharge. when you connect the battery the light will be off. Now, you only have about 15-30 minuted before the ...
...Pictures would be great. Although I am unfamiliar with the smart cars, it sounds like you just need to reset your computer. Remove the negative cable from your battery, then flip your lights on, pump ...
...negative cable from the battery (black cable with a " - "by the post).Trace the other cable marked positive with a " + " down to the starter.You'll need to remove any engine covers from underneath to ...
Question about Suzuki Forenza
...computer to maintain correct air/fuel ratio. Fuel trim numbers should be close to zero. It is when fuel trim changes by double digits-either positive or negative-that there is an indicated problem. ...
...Pictures coming next! CAUTION Always make sure that the ignition is OFF when disconnecting or connecting the battery cables. Failure to do so may cause damage to the computer control module or other ...
Question about Renault Cars & Trucks
negative side of the battery for five minutes. Then reconnect. This procedure reset the main computer which in turn might reset all codes program. Try this site for French Radio Codes: CLARION PEUGEOT
Question about Suzuki Forenza
...computer is unplugged, or the PCM has failed. Maybe a bad crank or cam sensor could be the reason. Try wriggling the PCM / wiring Disconnect the battery negative then unplug and plug back in the PCM ...
...negative battery cable. If you are going to remove the dashboard, etc to replace the blend doors. some websites give you complete instructions with plenty of pictures. It will take the average person ...
Question about Suzuki Forenza
...2002 Citroen Xsara 2.0 Hdi Diseal. looks like the computer in the car is not working correctly. best to unplug the battery negative terminal and leave it disconnected for few hours and then
...negative battery post. ( let sit for 3 to 5 minutes). Then start pulling fuses, when the light goes out that's your bad circuit. God-Bless! Its worth a try. Think u should git anotht mech. View ...
681 questions posted
Usually answered in minutes!
790 Questions
537 Questions
284 Questions
46 Questions
9 Questions