2003 Suzuki Aerio "idle air control" Questions

idle air control valve Need to replace one but the part is $300.00 It looks just like one from a 2002 ford ranger for $60.00 any chance they are the same?? it could be the same the connector,shape but

...air pockets there, it CANT work. 4: park car, idle until the minimum engine time is reached parked. about 180F, but all cars overheat if parked, idling and fan stays dead. fan is off , and at some ...

...Idle/Air Control Valve is bad. If you are able to remove it, you may find that it has some dirt or build-up in it and be able to clean it for it to work. This would more than likely be a temp. fix. ...

...idle controls are dead. on newer cars this is auto calibrated or fixed. the tps #1 purpose (if a small list ) is to enable enrich mode. when you move your foot fast the ECU drops closed loop and then ...

...Idle Air Control Motor) depending on how many miles you have on the vehicle these motors tend to carbon (soot) up and the pintle inside sticks causing the idle to be rough and raggy. The part can be ...

...idle controller , iSC. 4: air leaks in all MPI engine with MAF sensor will love to stall. 5: running rich, causing gross spark plug fouling and stalls. 6: gross lean fuel mix. (we call that bogging) ...

Idle Air Control valve starting to fail. An IAC (idle air control) motor is designed to adjust the engine idle RPM speed by opening and closing an air bypass passage inside the throttle body. The cars

Idle Air Control (IAC) Valve Removal Disconnect battery ground cable (14301). Refer to Section 14-01 . Disconnect the engine control sensor wiring (12A581) from the idle air control valve (IAC valve)

...Idle air control actuator - Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Idle_air_control_actuator An idle air control actuator or idle air control valve (IAC actuator/valve) ... ...

...idle air control) motor is designed to adjust the engine idle RPM speed by opening and closing an air bypass passage inside the throttle body. The cars computer or PCM (powertrain control module) ...