...without A/C ItemPart NumberDescription 16B209Belt tensioner 210344Generator pulley 38620Belt 43A733Power steering pump pulley 56316Crankshaft damper Component Locations -2.0L Zetec ItemPart ...
...car_repair_information/year/2002/make/ford/model/escape/2002_ford_escape_drive_belt_routing_diagram.htm It helps to list what engine ....... Accessory Drive 2.0L Zetec without A/C ItemPart ...
...pulley 48W508Drive belt tensioner pulley Water Pump Drive Belt - 3.0L (4V) without Tensioner ItemPart NumberDescription 16A359Camshaft drive pulley 28K543Drive belt 38A528Coolant pump pulley Go ...
...turbo van YOU HAVE IDLER PULLEY WITHOUT ADJUSTING BOLT.TO TIGHTEN DRIVE BELTS YOU SWIVEL THE IDLER PULLEY WITH A PAIR OF PLIERS OR WRENCH ON THE BEARING MOUNTING UNTIL THE PROPER TENSION IS
Question about Cars & Trucks
...drive exploer without idler pulley can something go wrong No you can not. The water pump will not run, the alt, power steering. Fix the idler pulley, it's pretty easy to unbolt it and put on the new ...
Question about Suzuki Aerio
drive system (without a/c) consists of : Generator Pulley (1) Water Pump Pulley (2) Idler Pulley (3) Power Steering Pump Pulley (4) Radiator Fan Pulley (5) Crankshaft Pulley (6) Automatic Tensioner (7
...Drive-Without A/C --------------------------------------------------------------------------------------------------- Belt -2.0L Zetec Removal Raise the vehicle on a hoist; refer to Section 100-02 . ...
...Drive belt tensioner 7 Generator pulley Hi, the belt can be reused, but you need to figure out why it came off. Check all pulleys for play and replace any accessory that has a loose pulley. Fig. Fig. ...
without using the ac at all? No - because of the routing of the belt around the idler pulley (above "A/C" in diagrm below)- there must be an AC pulley - or dummy pulley of the same diameter installed.
Question about Cars & Trucks
...idler pulley could be defective. This is a frequent failure item in Ford products of that vintage. The belt could have gotten worn by a wobbly pulley. The replacent pulley could have been installed ...
632 questions posted
Usually answered in minutes!
135 Questions
107 Questions
64 Questions
48 Questions
28 Questions