2002 Suzuki XL-7 "adjust belt power steering" Questions

...adjust P/S belt tension, loosen tension pulley bolts and turn tension pulley using hexagon wrench. 2)Adjust belt tension to specification described in CHECK. Then tighten tension pulley bolts to ...

...adjust the belt tension to the proper level. To adjust the tension on a drive belt, loosen the adjusting bolt or fixing bolt locknut on the alternator, alternator bracket or tension pulley. Then move ...

...belt. Adjust belt tension with 1/2 in. breaker bar installed in adjusting bracket Power Steering Belt Adjustment Tighten locking bolt G to 28 N·m (250 in. lbs.) Tighten locking bolt F and the pivot ...

...power sterring belt on my 1981 buick reveria IF you have a serpentine belt it's not a matter of adjusting the power steering belt tension because it's done automatically with a serpentine belt ...

...PULLEY, BECAUSE I CANNOT MOVE THE POWER STEERING PULLEY. HOW DO I ADJUST THE POWER STEERING PULLEY? try and loosen the power steering pump body, install the belt,adjust and tighten the pump body.

BELT LOOSEN POWER STEERING PUMP ADJUSTMENT BOLT AND MOUNTING BOLTS.****** FOR THE 2.4L ENGINE TO REMOVE POWER STEERING BELT LOOSEN TOP IDLER PULLEY.FOR ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR

...adjust the belt as follows: Loosen the alternator mounting bolt and adjusting bolt. Adjust the alternator to get the specified belt deflection. Tighten the bolts, then recheck the tension. Fig. ...

...belt tension is 196 N (44 lbs). Adjust the water pump and power steering drive belt tension as follows: Raise and support the vehicle. Remove the RH front fender splash shield (16102). Loosen the ...

...power steering belt on a 1991 Nissan sentra This is just a general answer. There are 2 ways to tighten a power steering belt, 1, by adjusting the power steering pump OR 2 by adjusting a tensioner ...

...adjust the belt as follows: Loosen the alternator mounting bolt and adjusting bolt. Adjust the alternator to get the specified belt deflection. Tighten the bolts, then recheck the tension. Fig. ...