2003 Subaru Forester "parts vacuum" Questions

...Vacuum leaks cause motors to shake and stumble on acceleration. 2) There's a plastic T connection on the back side of the engine behind and under the air cleaner box. That T connector joins together ...

how to change vacuum hose start engine look / lessen / and feel for the vacuun leak. if you find it - take a small peice to the auto parts store and buy enough to do the job.

...parts stores, also as stated bofore make sure the intake pipe clamps are tight and it's not cracked, if that doen't fix it i would investigate a fuel pressure problem either a weak pump or problem ...

...vacuum down, leak check and recharge. You will probably have to replace the filter/dryer (unless the dealer already has, for that $420 he should have). You can check at any good auto parts store and ...

cold start valve My Check engine light is on and my Cruise control flashing & disabled(As a result of the engine light being triggered. Subaru have advised the me the Cold Start Valve on the Turbo

...by model and find correct part no Electrolux Canister Vacuum Cleaner Switches ' eVacuumStore.com This website has prices too Electrolux Switches - Electrolux Vacuum Parts - Vacuum Parts

parts you replaced sound like low compression or intake vacuum leak.replace all vacuum hoses, do a engine vacuum test and check compression see if engine has vacuum leak at intake manifold or worn out

...parts(EGR), the transmission shift solenoids may be Vacuum operated, so when the defective part receives Vacuum force, it leaks out and stalls the motor.One of the old tricks is to get an old spray ...

CORVETT POP UP LIGHTS Hi I have a 1977 corvett stingray. Do you have any ideas as to get the vacume system on the pop up lights to work correctly. They sometimes will go up, 1 at a time but very ...

trble code PO401 and PO455 codes light up along with engine light on. one mechanic looked at it and said it needs a DPFE sensor. What is that and where is it? I can do the work if I know where it is. ...