1999 Plymouth Voyager "rpm working properly" Questions

I. Have a 99 plymoth voyager and the rpm and speedometer work it just takes a few seconds to kick into gear whats the problem and what can i do check the fluid for proper level, always check when warm

...RPM sensor went idle after repairing the alternator and battery. The speedometer works properly. Thanks Might be something hasn't been put back on properly. When you work on a car, you can sometimes ...

...rpm? The rest of the sensors work properly. It happened after the alternator and so the battery went down. It's just the rpm. Thanks If the filter box was removed during repairs make sure all ducts ...

and the computer shows 9 volts to the sensor It would be helpful to know what you are working on, but generally ignition modules have two sections--one low RPM and one High RPM. Have you tested yours

...working properly. May be going in and out causing the rpm change. There is an adjustment for that. I would certainly get a second opion for this..Most people ignore there transmission (including ...

working properly, all sensor fail soon or later. RPM majority of the time will be faulty wiring from your distributor. check make sure there is no oil leakage into you distributor, it will also create

...working My Rpm and Gas gauge quit working the rpm will work every once in a while but the gas gauge stays on full until you are out of gas I didn't see an s15 in that model year, in my database? If ...

...in my 2005 mustang do not work properly. is there a way to fix them without getting a whole new cluster? The speed odimeter and RPM gauges without at the same. Everything else is working.please ...

...rpm's are below 1000..it takes a long time to accelerate.. we changed spark plugs and head gasket.. has new battery did full tune up (oil change, oil filter, gas filter, high flow air filter) it was ...

working properly My rpm gauge seems to fall while driving. It will work properly for awhile and seems to fail. I will have to restart the car for gauge to start back working right, but after awhile it