1999 Plymouth Voyager "finger guard" Questions

the fan on the 1999 Plymouth voyager is making noise Spin the blades with your fingers while listening for the noise--either bad motor bearings or a warped blade causing interference with the blade ...

...I think. Look at 3M 06396. It comes in little packets like you get at restaurants to wet wipe your fingers. This is for the plastic. For the painted metal, you need to use an alcohol wipe to clean ...

...off the guard in the front. You'll need small hands and make sure not to touch the bulb with your fingers when

...guard then look for the filler plug. Remove the plug and using your small finger, feel the level of the fluid. The fluid should be even with the bottom of the plug hole. If the fluid starts to ooze ...

...finger in there and release this spring loaded metal piece, the door will now fall down. From the bottom, you need to remove the plastic kick guard below the glovebox to access from the bottom. ...

...guard under the glovebox to access the bottom of the blower motor. Remove the 2 tiny screws that attach the part. Then open and empty your glove box. Stick your finger in the access hole on the left ...

guard lower portion near the harmonic balancer. Remove all drive belts. First remove the A/C alternator belt. Loosen the 14mm bolt at the front of the belt tenioner and then loosen the tensioner bolt

...hub bolts) It can take a 195 up to 245 tyre width (current size is 215/60/R16) 215 wide I have a finger width of clearance from the tyre to the shock absorber so I cant go any wider. A little more ...

Behind the kick panel to the right of the passengers foot. There is a hole in the panel to insert a finger to reset. Next is under the rear dash panel, in the trunk. then in the trunk also, behind the

...used, there is not enough room to between the engine and shock tower mount. Take your time, the fingers get's cramps. It sounds like this is your first time changing the plugs, they all come out ...