1999 Plymouth Breeze "thermostat housing" Questions

...the thermostat is at, where the upper radiator hose hooks up to the motor, thermostat housing held on with two small bolts.when remove thermostat do it with cold engine.Hope this was very

need to replace thermastat loction of thermastat generally if you follow your top radiator hose from the radiator it will connect to a housing on the other end. the thermostat is in that housing 

...thermostat housing area usually). Then take your water hose at your house,with a common old pistol grip nozzle,and spray water back thru the heater hose you took off the water pump side and that will ...

where is the thermostat located on a 1998 plymouth breeze follow the upper radiator hose to where it meets the engine... that's the housing

where is the coolent temp sensor located should be on the back of the engine near the cylinder head by the thermostat housing

98 plmouth breezee P0117 dtc is this faulty sensor where is it located should be located in the thermostat housing, or coolant pipe at intake manifold

...thermostat, if silicon was used to seal the housing, could be contaminated and staying closed causing the overheating. Take the thermostat out and check for opening in boiling hot water. Also, try ...

the thermostat housing On a 97 Plymouth breeze On most cars if you follow the top radiator hose from the radiator to the engine...the hose usually connects to the thermostat housing. Hope this helps..

engine side end of the upper radiator hose. Drain coolant first, then loosen radiator hose to access thermostat housing. If you can't find the housing, consult your vehicle service manual for location

can't locate the temperature sensor for 98 plymouth breeze look for it around the thermostat housing.