1999 Plymouth Breeze "replacing upper coolant hose" Questions

...upper and lower hoses hot to the touch and pressurized? If the top is but the bottom isn't then you have a curculation problem. You didn't tell us where it sometimes leaks fluid so I can only assume ...

...coolant system squeze the upper radiator hose, if seems empty or can hear coolant swishing around, then there is air in the coolant system and also coolant level not compmetely topped off. Top off ...

...coolant into a pan. Remove the Upper radiator hose Loosen the clamps that connect the upper radiator hose to the housing and remove the hose. Remove the thermostat housing Loosen the thermostat ...

...upper and lower hoses not hard at all drain the coolant, loosen or cut the hose clamps and remove the hoses,replace with new hoses and fill with coolant, then start car and when coolant fills the ...

coolant ready. Follow the upper radiator hose to the point where it's connected to the engine. The hose is clamped to a metal housing (water inlet) which is bolted to the engine. Remove the bolts (not

replacing the Radiator YOU NEED TO DRAIN THE COOLANT SYSTEM. REMOVE THE AIR CLEANER ASSEMBLY.YOU NEED TO UNBOLT SWING AWAY THE ENGINE TORQUE STRUT MOUNTS FROM THE UPPER RADIATOR SUPPORT.LOOSEN THE THE

...coolant. Leave cap off Start the engine and squeeze the upper radiator hose several times to remove air. Watch for the level in the radiator to drop Add coolant as needed, till the level is even with ...

Radiator outlet hose and clamp. Coolant pump pulley. Fan and fan clutch assembly. Multiple ribbed drive belt. Upper fan shroud. Coolant to the radiator. Important Start the engine and check for leaks

...Coolant Fan Upper Shroud Replacement . Remove the drive belt. Refer to Drive Belt Replacement in Engine Mechanical. Remove the fan and fan blade clutch assembly. Refer to Fan Replacement . Remove the ...

...upper heater hose burst and i replaced it and refilled the coolant. Now once the car gets warm i get white smoke/steam out of the vents. Smoke through the vents indicates a heater core issue. If you ...