1999 Plymouth Breeze "direction thermastat" Questions

temp gauge and light come on and dies overheating so put water in empty overflow.fans are working. put a new thermastat in,still running HOT.adding water directly to radiator. oil looks good, checked ...

...NEW THERMASTAT IN THE SAME DIRECTION AS THE OLD ONE COMES OUT! REPLACE THE HOUSING, TIGHTEN THE BOLTS, AND PUT THE RADIATOR HOSE BACK ON, RETIGHTEN IT, AND FILL WITH ANTIFREEZE, AND CHECK FOR

HOW TO CHANGE THERMOSTAT ON THE V-6 First make sure engine is cool. -Put drain pan under car, coolant will run out. -Remove the TOP radiator hose that runs to the metal thermastat housing. Coolant ...

...Engine surface to make sure theres no Leaks. To install the New Thermastat JUST REVERSE the Removal Directions Above. And refill it with Coolant and after you've gotten everything Back together , ...

...-Check the heater control valve and flush the heater unit with water of garden hose from both directions. Q: How do I know that is working or not? A: Slide the heater control from Hot to cold

thermastat which direction does it set into engine protrusion or flat side. I replaced it , but it leaks , so i will have to redo it. it sets in differently then most am right The protrusion or spring

Need thermastat direction on a 97 mercury villager http://groups.yahoo.com/group/villagerquest/

2000 hyundai elantra is over heating,new thermastat and reserve is filling up but radiater is empty Add coolant directly to th radiator. And see what hapen next

where is the location of the thermostat 2002 pontiact gran prix engine? (or climate control Hvac stat)? engine, see the radiator one large hose goes directly to the thermastat housing.

...clamps and pull the hoses off. Using a garden hose flush water through the heater core in both directions. Reattach the hoses, clamps and remove whatever was used to pinch off the hoses. Top off ...