1999 Plymouth Breeze "bulb" Questions

How to replace a headlight bulb in a 98 plymouth breeze these bulbs go in from behind the headlight assy. from under the hood look at the back of the headlight and locate the wiresgoing to the back of

My 97 plymouth breeze's right rear tail light went out, I changed two bulbs. Now my right turn signal clicks at twice it's normal rate. Is it most likely Bulbs, fuse, or a pesky short. It is most ...

the bbulb worked when it is hot ...if the bulb is the bulb worked when it is hot ...if the bulb is cold i have to hit the headlight lense for it to go on Replace the bulb it is about to burn out, just

... Check the tailight sockets for corosion. Is there a tow package wiring installed? first remove the bulbs then put in fuse if fuse does not blow then your wiring is good and it is in one of the bulbs ...

breeze's brake light went out. changed bulb, now whole tail light won't work. 97 breeze's brake light went out. changed bulb, now whole tail light won't work. Rt turning switch inside blinks very fast

99 ply breeze pass side rear signal light changed bulb bulb i took out looked good still does not work stop light was out so removed tail light and replaced bulb works now but signal light does not ...

...2000 plymouth breeze when the headlights are turn on There may be a problem with the duel filament bulb, or a fault in the earth wire to that brake light. Try a new bulb first , then try a small

I am trying to replace the brake light bulb on 97 I am trying to replace the brake light bulb on 97 plymouth Breeze. How do I get to the bulbs to replace them? Does the outside brake light cover have ...

...neither does my hazard lights I don't know the exact name part to order have you checked the bulbs and the fuses? there should be a flasher fuse/bulb could look something like a little light ...

my driver side head light just went out on my car how do I check itto know if it the bulb or the whole fixture? Put in a new bulb. That will tell you if the bulb is bad. If it doesnt light up after ...