oil pressure sending unit where is the oil pressure sending unit located On all 2.0L and 2.4L engines, the oil pressure sending unit switch is located on the engine block, below the exhaust manifold, ...
...info check for loose wire on sending unit or could be defective oil sending unit if none help have checked with oil pressure checker to be safe Better check your oil level. Indicates low oil
oil sending unit or possibly other causes First check your PCV system and make sure it is in good working order this is a must. Then check the cam sensor or oil sending unit, it is located between the
...is oil sending unit located for 98 plymouth breeze where is the oil sending unit located? In the block on the right side (rear side near firewall) close to the transmission under the exhaust
also, mostly durango's. But when you change a oil sending unit and it doesn't help, light or gauge. then the crankshaft bearings are worn and it's time for an engine rebuild or replacement
oil pressure sending unit is leaking oil, what is the easiest way to replace it, 1996 plymouth breeze 2.0 liter They make a special socket to fit those which you can get at an auto parts store along ...
oil light comes on after a few miles, all levels are fine..oil pump ? have the oil pressure checked with a mechanical test guage, if it tests ok then replace the oil pressure sending unit.
My oil light is on, and the oil level is fine. What could the problem be? Check out the oil sending unit ,plugs into the oil pan may be need to replace
Question about Plymouth Breeze
...what causes that? need more info is there enough oil in engine? if so check oil sending unit to see if wire is loose if ok have oil pressure checked with oil pressure guage to see if oil pump is ...
Question about Plymouth Breeze
...oil sending unit on a 2.4L 1998 plymouth breeze? found it look here... ...
657 questions posted
Usually answered in minutes!
463 Questions
279 Questions
185 Questions
118 Questions
1 Questions