1992 Plymouth Laser "key" Questions

Ad

New key for a 2000 ford laser. Car starts but won't runl I have a new key for a ford laser. The car will start but not run. The car runs with the old key. Is there a sequence of actions I can take to

Ad

Question about Plymouth Laser

1 Answer

ford laser 2001 door lock the drivers door will not open with key or from the inside. Jiggling the key and the interior lock knob simultaneously does release the lock but there is a screeching sound. ...

Ad

...be driving and it just stops some times if i pump gas it will keep going if it stalls turnning the key a number of times it will start back up whats wrong? You'll need to figure out if it is fuel or ...

Question about Plymouth Laser

1 Answer

...or possibly the ASD relay. need to make sure you are getting voltage to the fuel pump when the key is on, the pump will run only for a few seconds when you turn the key to start to prime the ...

...AC and windshield wipers. The fault was a worn ignition. These functions come available when the key goes past the accessory feature. On my car you can jiggle the key back towards the accessory

Question about Plymouth Laser

1 Answer

...on but when I try to crank the engine I get nothing. I cannot even turn the radio on with the key in the "on" position. Also, the lights do not dim when the car I turn the key. sounds like the ...

Question about Plymouth Laser

1 Answer

clutch and starter when i turn the key the starter wines out and dosn't not grab on fly wheel. remove the starter motor. disassemble, clean thoroughly and assemble. the pinion should be jammed, so it ...

i need wireing diagram for starter 1991 ply lazier when i turn the key i here a buzzing sound is all ..new batt starter is good bendix in the starter is not engaging.replace bendix

How come my window wiper dash light stays on when i turn my key off How can i get rid of the window wiper light on the dash board It means that you are out of washer fluid.

Question about Plymouth Laser

1 Answer

...start. Check power to the fuel pump relay. You should have constant 12V on 2 places. And when the key is turned to crank, the PCM should ground the

Not finding what you are looking for?
1992 Plymouth Laser Logo

63 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...