2000 Mercury Villager "sticky lifter fix" Questions

Ad

Question about Mercury Villager

1 Answer

...sticky lifter is add 1/2 a can of seafoam motor tune the oil. Start the engine and let it run until the noise goes away. Then change the oil. If the noise doesn't go away than you have bigger ...

Ad

Question about Cars & Trucks

2 Answers

...any rotating pulley can sound similar and you need it narrowed down to exactly what needs fixing . noise lifter either rocker is loose -bent / clogged push rod -sticky/ bent valve --or lifter ...

Ad

...lifter being sticky inside, or a rocker pivot being a little worn. Most just get a bit sticky (internal hydraulic plunger inside a lifter or two). To fix that I generally change the oil to a good ...

Question about Mercury Villager

1 Answer

...oil or lucas oil treatment to the engine oil and if the lifter is just sticky, it should quiet it down. If it does not respond, unfortunately, you will need to replace it and inspect the cam for

Try a cup full of transmission fluid dextron 3 in the engines oil till you next oil change. Sometimes the hydraulic lifter get sticky inside.The dextron will help the rubber seal in the motor as well

Question about Mercury Villager

1 Answer

timing belt. In garage and does not happen at every cold start. Never on warm start You have a sticky lifter.. put a pint of Marvel Mystery oil in the crankcase. Let it run a while. That should fix it

...sticky lifterusing 1 quart of ... Chevy 5.3 liter lifter noise and motor flush solution How to ... 4.3 engine knock lifter or bearing? - YouTube ? 1:22 https://www.youtube.com/watch?v=oSbyAbS6e2c May ...

Question about Mercury Villager

1 Answer

...be my ERG valve. How do I fix this? it could be a sticky lifter I would try to run a quart of rislone engine treatment thru it when you change your oil. The lifter could have some dirt or sludge in ...

...Is this a "lifter" and how do I fix it? it could be a lifter or a sticky injector I would say to see your kia dealer for issues or recalls they are good about following thru with ...

Question about Mercury Villager

1 Answer

...ie you might have a sticky lifter. you can fix this yourself if you know what a lifter is and were it is situated... if you dont know any of the above I recomend you take it to a someone who

Not finding what you are looking for?
2000 Mercury Villager Logo

387 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...