2000 Mercury Grand Marquis "head" Questions

Ad

Question about Mercury Grand Marquis

2 Answers

where is the head gasket located at on a 1994 grand marquis The head gasket (in your case gaskets) is located on the top of the engine block under the engine cylinder head which is under the Camshaft ...

Ad

Question about Mercury Grand Marquis

1 Answer

bubbles coming from head gasket 2000 grand marquis with 134000 miles i' ve notice small bubbles coming from the head gasket driver side front bottom. it's doesn't smoke, run hot.or used oil. what can ...

Ad

...grand marquis keeps throwing a plug. Mechanic says if it happens again I need to replace the whole head. Is this true? You install spark plug inserts in the head There are at least three of those ...

Question about Mercury Grand Marquis

1 Answer

...not come out vents,only defrost and floor the vacuum harness connected to the back of the control head is not fitting tightly any more. Pull narrow trim panel covering control head. remove 4 screws ...

Question about Mercury Grand Marquis

1 Answer

...heater controls in my 2003 grand marquis that is in default mode. Do I need to replace the control head ? I've been unable to find any vacuum leaks.Or is it all electric controlled. I still have all ...

Question about Mercury Grand Marquis

1 Answer

tiny oil leak from head gasket can a head gasket leak Or blow without it running hot Yes. But is it the head or the valve cover leaking oil?

Question about Mercury Grand Marquis

1 Answer

location of cht sensor for 97 mercury grand marquis I do believe the cylinder head temp sender is screwed in the head under the front edge of the intake, behind the alternator. Drivers head

Question about Mercury Grand Marquis

1 Answer

oil leak have a small oil leaking coming driver side front head gasket. it doesn't smoke, use coolant , or run's hot . the oil level is fine no coolant in oil. how long can i drive like this & how

Question about Mercury Grand Marquis

2 Answers

cylynder head needs to be replaced. what will it cost. it has a 302 5.0 about $800-$1000 for one cylinder head parts and labor, but it is recommened always that both be replaced or rebuilt. Head ...

Not finding what you are looking for?
2000 Mercury Grand Marquis Logo

1,045 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...