2003 Jeep Grand Cherokee "wheres idle control located" Questions

Where is the idle located at It is computor controlled via idle speed motor so would check and replace idle speed motor

...control, air conditioning compressor clutch engagement and idle speed. The PCM can adapt its programming to meet changing operating conditions. It is located on the cowl panel, right rear side of the ...

...idle air control motor this is located on the throttle body, but because this happens while driving I am thinking you will need to replace your crank shaft position sensor it is located on the ...

...be the problem? there is an EGR valve, its located on the intake manifold, it could be vacuum controlled, it should be closed at idle and open only when driving. do you have a check engine light

...dies. Will not idle. replace the idle air control valve and that will solve your problem good luck, hope this helps, here is a picture of the part and a diagram of its location on the

...idle air control located on 1995 jeep grand cherokee and how to remove and clen..... or just go to goodyear autoservice You will find an oval shaped connector going into your throttle box. Simply ...

idle control valve) is stuck in the bore of the throttle body. you can do this by; remove the air snorkel from the throttle body. locate the IAC, it will be round, sometimes silver or gold metal color

...Idle Air Control. which could be dirty. or maybe faulty. A good cleaning will fix the problem or a replacement would work too. The idle air control valve is located on the back of the throttle body. ...

...idle control valve is getting bad.this controls your idle speed of the motor, another possibility is your ignition control module may be giving you some notice that it may be ready to go out ...

idle control valve./ valve passages. (there are electrical tests you can make on these and valve can be cleaned with carb cleaner, (carefully without turning internal plunger.) It sounds like the idle