2003 Jeep Grand Cherokee "put reverse started back" Questions

...transmission and then tell you it needs a clutch also while he's in there. hi, i have tj 1999 was fine but yesterday i put in reverse star go back at stop when no reason at no let me go back just ...

...in drive it stalls in drive or reverse but if you put it in low 4wd it will drive and back up. check your air filter, if its dirty your engine could not be putting out enough power in the higher ...

put in reverse to back out of driveway truck will kill ,desperatly need solution ,going fishing thanks gary It seems that you may have a wiring problem. When you put the car in reverse the engine will

put the truck in reverse to back it out of the garage and it stalled. Now it won't idle at all. It will only start if I put the gas pedal to the floor. After I get it started I have to feather the gas

...put it in gear whether it is reverse or drive , it will just die and before it will start back you have to put it in park, turn the key off and wait about 10 seconds and then it will start rite back ...

...put it in reverse a strong odor of exhaust can be smelled, backing out from a parking space, then putting it into drive it will shake violently and die, then it is hard to r Jeep will start up then ...

...Put new lever over cable start the nut back on Cable bolt back in position tighten cable nut.start vehicle pull brake try to go forward then reverse if it moves tighten cable til you can't ...

...put it in reverse i get no back-up lights. From what i get these transmissions use a Trans. Range sensor that mounts above the valve body. It will only start in Park and Neutral . Could that be the ...

...put it in reverse it dies out. Once it's restarted i have to quickly put it in drive to keep the motor running. I had the same problem. I took it to a mechanic and he piggy backed a bad wire around ...

How do you turn on the back-up distance sensor - not the button on the dash that starts as soon as you put the car in reverse? ADHFJYJRTHHD