Question about Jeep Grand Cherokee
...I then see if the power is lost before that fuse or after. i before i work to the engine bay main fuse box. PDC. I then find the point power does not drop the failure IS between those 2
...main seal. Which is fine. The next day they tell me it needs a new computer. The only electrical issue has been the check engine light. Not sure what to believe. The oil leak and the computer are ...
Question about Cars & Trucks
...engine failure what is the main reason of this if it is a diesel engine m, it is uncontrolled governer it take several seconds for oil pressure to build up so it is possible that there was a bearing ...
reasons, first the macro list (pure physics) A: engine producing too much heat. B: cooling system failure. C: both.! what car, what year, what model car. gee, just a hint? Micro: engine timing way off
Question about Nissan Cars & Trucks
...generating electricity. The following is compiled by Jiangsu Starlight Electricity Equipment Co.,Ltd to summarize the main reasons for generator not to generate electricity and the treatment
Engine fault light, for the oxygen sensor failure, (the reason is low grade gasoline, octane number cannot be reached a certain quantity of heat, so that the oxygen sensor is unable to transfer to the
...mayonnaise, this can be what has happened. It needs an oil change, goo clearing out and all the breather pipes cleared. Otherwise the engine suffers a lack of lubrication and the main bearings
...main bearings failure. There are 3 possible reasons the oil light would go on. The 1st and 2nd reason would be due to no oil lubrication of engine components. This could be from a failed oil pump, or ...
...engine (Con rod or main) bearing failure. The smoking is generally a sign of oil in the upper cylindr/combustion chamber. This can be traced to rings and or valve problems in most cases. Unless of ...
Question about Jeep Grand Cherokee
...main reason for this problem. Run the fault codes to check for sensor failure. Remember that coils operate on a pulse and the current used is kept low but if you leave the ignition on ( run the ...
1,568 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions