2003 Jeep Grand Cherokee "connect dash symbols" Questions

brake . thanks The red ( ! ) symbol right? It might be a burnt out fuse, or the E-brake cable isn't connected

...connect a universal OBD2 scan tool to the 16pin dash port, and scan the PCM. and see all those errors. takes about 5min. work. may auto stores, state side, do this for free. or loan a full tool to do ...

...lights flashing after battery cable removal-no start i cleaned battery cables/contacts, after connecting the engine wont start and security lights flashing, on the dash the word security

...working or charging the battery. You say you installed a new battery, then something is or was not connected properly because that Battery symbol you see on means it is probably not charging the ...

...shows up on my dash. the lock is anti theft, This sounds like an electrical mess, Possibly poor connection at a wire ...

...connect to scanner. Dash odometer display reads -----. Car starts and runs (sounds ok) has alternator light on, trans? (that round symbol with scalloped edges) light and check engine light that will ...

...engine symbol has now stayed on in the past day on the right of the dash. What sensors is this connected to and is it expensive to fix? The warning lamp you described is called the "Check

dash board symbols Vehicle won't start, I have cleaned battery post and attempted to jump, still no luck. My radio, windows, ctc all work, it just won't do anything - please help if you can Could be a

...help? Thanks Alan! It could be the immobilizer receiver, ECM or something related to the battery connections. I would check the battery connections first, go to autozone or advance have the

...line (including ABS), all fluid levels & their conditions, exhaust system, fuel lines & connections. Symbol 1 - Rotate tires. Symbol 2 - Replace air cleaner element (dusty conditions