location of knock sensor? Look under exhaust manifold on drivers side, closer to rear of engine, mounted on engine block. Keep in mind that the knock sensor is a tuned piezoelectric crystal transducer
...crystal clear reception, and it's quite annoying. do i need to recode my radio to pick up these other stations? or is there another button i need to press before doing a manual tuning? or is there ...
...crystal clear reception, and it's quite annoying. do i need to recode my radio to pick up these other stations? or is there another button i need to press before doing a manual tuning? or is there ...
Question about Jeep Grand Cherokee
Dodge dealer says i need to replace engine (360)dodge ram(5.9)M My 1999 dodge ram 2500has 36000 miles on it.Iha an overheating problem at Nashville TN and Hansen dodge said i needed anew radiator and ...
Question about Jeep Grand Cherokee
when timing is OK, fuel is ok, good spark, still does not want to start You say fuel is OK, but have you tested the actual pressure? Have you used a noid light to check for injector pulse? this post ...
...crystal oscillator was torn so that the two pins were connected. 2 I also measured a short at Cap 84 when i removed the cap the short was still present. 3 When measuring in diode mode i couldn't have ...
Question about Holden Cars & Trucks
Rodeo ra4x2 crew cab. Why doesn't it continue running? I start it up to warm up and a few minutes later it stops. I restart, but it doesn't run How long is that piece of string. No details offered. No
4,552 questions posted
Usually answered in minutes!
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions
2,639 Questions