1996 Jeep Grand Cherokee "put radiator water" Questions

put the radiator cap,and your radiator is up to date The best way is to remove the transmisson lines and undoing the Large hoses to the radiator and then pull fan and 4 bolts holding radiator in place

...radiator. I put a stop a leak in it and the fan started making a grinding sound then it stopped startd smoking and I shut the car off. You have cooked the engine, you can try replacing the radiator ...

...radiator,, you can have them pressure checked . I'd do that first , by put thermostat in, I'm assuming you meant you replaced the one that was in there to begin with, if thats the case, make ...

...put new water pump and thermast in still getting hot like water is not flowing cheack top radiator hoses and its hot bottem hose is cold is it a bad radiator what can i do??? Hi David, How long did ...

...put a new radiator and thermostat in my jeep a few months back and worked jut fine until today. I drove about a mile and a half from my house and it dies. i looked down and it was overheated i put ...

...radiator hose. it may sound childish but if you do it that way, the last number you put on is gonna be the first place to start and you won't forget a step. next, remove drive belt, that's the rubber ...

...put your hand close to the radiator fan. The surest way is to take it out and put it in a small pot of water and heat it on the stove top. As the water heats up the thermostat will begin to open and ...

...put on a thermostat and a new fan. Also a relay and radiator and ac condenser. What else could it be? did try replacing the water pump? quick trick get a soda bottle with the mouth big enough to fit ...

...radiator put in, new water pump put in, all this time I keep putting coolant in, at first it was every 3 days, now every 6 days after water pump was replaced...don't think I needed the new ...

...put antifreeze into the engine and radiator.:) http://www.scribd.com/doc/20027717/Jeep-WK-Grand-Cherokee-Section-07-Cooling Go there and look at page 12. I have no way of knowing your engine size. ...