1996 Jeep Grand Cherokee "infinity base working" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

...infinity (OR/OL) is bad. now the rules of ASD. got spark cranking? got spark for 2 seconds cranking, is the ASD closing for 2 seconds, the drops out cranking? here are the 7 /8 rules of ...

Ad

...base/index.htm?utm_source=cj#service see page 2, in wiring wipers there. see how that works, unlike what mont says. The wiper driver stalk switch rarely fails. The wiper has park sense, contacts. the ...

Ad

...working 2006 on my infiniti m35x in the base of the back doors there will be a corraguated rubber tube check it is intact thats where all the wires are for locks and windows a wire could have ...

C1130 code on my infinity what is the problem please help I think from reading this description C1130 - INFINITI - Engine Signal 1 When Detected Based on the signal from Engine Control Module (ECM), ...

no voltage at lighter base inside. Ground is ok. Fuse is good and have voltage there. horn works. don't know how to get to the lighte connector.??? Pry out the socket with flat-head screwdriver. The ...

Question about Jeep Grand Cherokee

1 Answer

infinity gold radio seems to work but cant get any sound It's really hard to answer a question such as this. There's barely enough information to reach any type of conclusion. What kind of ...

Question about Cars & Trucks

1 Answer

...infinity reading on an ohmmeter, indicating no short circuits in the cable or aerial base. Measuring between the outer and a good ground the reading should be very low, no more than a few ohms ...

The back of the seat of my 2003 G35 moves forward but not backwards. All the other buttons work...I'm able to raise/lower, tilt and move the entire seat back and forth. Any suggestions? this is not ...

Question about Jeep Grand Cherokee

1 Answer

...base/index.htm?utm_source=cj#service and the schematics at the end. the coil primary is about 2 OHms (never infinity ohms) the secondary is about 15,000 (15K) ohms, not zero not infinity lets now do ...

...base is rusted and is no good now. rust is and electrical insulator to a horn. if no 12v, go to the relay, i see the output of relay is dead, no 12vdc honkiing i then check across the coil of said ...

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

4,552 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...