1996 Jeep Grand Cherokee "bad ignition" Questions

Ad

Question about Jeep Grand Cherokee

3 Answers

...bad ignition coil use only a name brand coil ,but it could be a bad computer but not very common check wiring to ignition coil A if it was good, substitute coil A and B then look to the recorded DTC ...

Ad

...ignition switch is bad on my 1995 jeep grand cherokee lerado 5.2 liter The ignition switch does not usually go bad on Grand Cherokees but the ignition key cylinder does and it usually just stop ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...ignition switch is bad your car will not run. All of the electricity in your car runs through the ignition switch and if the switch is bad it can cause many electrical problems and in return your car ...

Question about Jeep Grand Cherokee

1 Answer

...bad ignition fuse, loose or corroded negative battery cable. You will have lights, stereo and fan but not enough power to turn starter. Also a bad neutral safety switch on the tranny would cause this ...

Question about Jeep Grand Cherokee

1 Answer

...bad and needs replacing at a cost of $1400! Can this be correct? The ignition cylinder is only $120. I cannot understand how the housing goes bad and that is all the explaination I received about why ...

Question about Jeep Grand Cherokee

1 Answer

all good, test lighted the wire going to the ignition coil & it has no power going to it, any suggestions please driver side rear top of transmission is where your crank sensor is likely to be bad

...starting of the vehicle key spend arounds in the ignition and wont engage to start its bad, the key lock is bad. replace it, the FSM covers how, some newer cars only dealer can do it. (transponder

Question about Jeep Grand Cherokee

1 Answer

...and gets ruined. A misfire is usually caused by bad spark plugs, ignition wires, or distributor cap and rotor. There are other things as well but the ignition system is always the starting

...ignition switch is bad or a bad wire from the switch. Replace the switch. Check wires also, because they can burn when the switch goes bad. Peel back about six inches or so of tape. If the plug is ...

Question about Jeep Grand Cherokee

1 Answer

through and when power returns it ignites in the exhaust resulting in a backfire. I would look for a bad ignition switch, or other loose connection that could me making/breaking contact intermittently

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

4,552 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...