1995 Jeep Wrangler "replace main bearing seal 1997" Questions

...an not the rest of it? to get the throwout bearing, the trans will need to be removed, and while its out, go ahead and replace the clutch, resurface the flywheel and replace the rear main oil

1997 Wrangler 2.5L. When running there is a good bit of noise that appears to be coming from the water pump. The rest of the engine is tight and clean. There are no oil leaks around the main seals and

1997 camry 4cyl american made. Any estimate on cost of replacing the rear main bearing seal? About $600 to $800 unless you do it yourself. The seal only cost about $20.

...bearing located on a 1997 vw jetta. i'm replacing the trans, clutch, rear main seal, and need help. It is located on the transmission input shaft collar of the transmission inside the ...

...replace if necessary. Position oil pump screen cover and tube on oil pump with a new O-ring and hand-start two bolts. Install bolt retaining oil pump screen cover and tube to main bearing stud spacer ...

main engine seal. Replace the clutch Step1 Follow the instructions for replacing your car's clutch carefully to avoid having to remove the transaxle. Step2 Check that the transaxle's input shaft isn't

...replace one do them both. With the oil problem, could it be transmission fluid? You might have a leaky transmission cooler line. Could be rear main leaking which is motor oil. Might not be leaking ...

...replace the clutch and the rear main oil seal. You would best have the mechanic take the trans out and apart. If the mechanic thinks bearings are the only thing wrong, then I would go with that. But ...

...of the way and if you have high mileage on your engine I would spend the extra 15.00 and replace the rear main seal, If you are in need if the dealer repair manual send me an email at ...

...in my 1997 jeep wrangler the trans is a AX5 After the trans is out, its right there. I would suggest you do the complete clutch replacement, while its apart. Also replace the rear main oil