1995 Jeep Wrangler "linkage" Questions

Ad

Question about Jeep Wrangler

1 Answer

Door linkage on '95 Wrangler..... I need a schematic of the linkage in the '95 Wrangler if possible. If not, can you tell me what holds the linkage onto the "inside" door mechanism? The linkage has ...

Ad

Four wheel drive hangs up after disengaging Are you lifted or stock height? The 4 wheel shifter linkage hanger is located on the drivers side front tranny tunnel (to the left of the 4wd shifter on the

Ad

...nutral and it stayed in park...what is wrong? Have some one move the shift lever and you watch the linkage under the car to see if the lever is moving on the transmission. Sounds like the linkage is ...

Question about Jeep Wrangler

1 Answer

...but does not unlock it's now been three days trying no luck it almost sounds like the lock to latch linkage is disconnected or broken -- or the latch itself is broken(?),, but I can't imagine both of ...

Question about Jeep Wrangler

2 Answers

manual trans is stuck in first gear if the linkage at the transmission is not tangled with the other set of linkage then the problem is deeper in the transmission, and the syncronizer is at fault...do

missing factory throttle linkages on 1990 YJ jeep. Need Diagram I recently bought a 1990 Jeep YJ Wrangler w/ 4.2L 6 cyl, 5spd. The factory throttle linkages are missing. Need diagram and where to buy ...

Question about Jeep Wrangler

2 Answers

...goes through to shift. I dont see any plates or openings other then that to look inside at the linkages or anything. Any help anyone can give me or some information on the transmissions in these ...

stuck in reverse position however the truck will not move Automatic or manual? Have you checked the linkage? x2, what trans, auto or stick you broke the linkage. if ON "R" and dont move that means the

Question about Jeep Wrangler

1 Answer

is loose between N, R, and P. I have to verify the actual position via the dashboard indicator. bad linkage. jeep can sell you the parts that are worn. while looking at the shift linkage, and shifting

the linkage is hanging from the clutch pedal i think a snap ring came out but not for sure check the linkage to the clutch pedal then adjust try checking the snap ring for safety . and check the ...

Not finding what you are looking for?
1995 Jeep Wrangler Logo

893 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...