serpentine belt squiks when I start the engine When the belt starts to squeals, its time to replace it. over time the belt will streach and get glased over. 9 time out of 10 replacing it will stop the
jeep belt squealing 2006 jeep wrangler belt squealing look for a weak tensioner ,or a bad belt,one or the other,or both are your problem.
...gear especially above 2000 rpm. In 4th gear at 30 mph the noise is reduced or absent. Check your belts and pulleys. Belts should not be cracked and pulleys should turn freely with no
...is a loud squealing sound in my engine; I changed the tensioner pulley, idler pulley & Serpentine Belt. The sound is still there. What else could it be?? hey Its possibly the belt!!! did you change ...
squeal. When I accelerate you can hear it more, but sometimes that noise is still there when I am moving but not hitting the gas, but not as often as when i accelerate, but it is still there sometimes
...belt can squeal too at times from a manufacturer defect. You might want to check the PCV valve and hose to see if that is connected well and not clogged. If this is something other than the belt such ...
...just go a little bit more. If the belt is too tight it will wear out bearings in water pump,Alt, pullys ect. If its too losse it will squeal and wear out the belt so take your time on the
...cold, and at an idle the tac stops working , and the ammeter shows a negitive charge, and then the belt squeals. Once it warms up it seems to correct it self for the most part, The Tac will only go ...
...pump and now when i turn it on it screeches. what do i do? Sounds like a loose or worn belt, fitting new steering will put a little more strain on the pump, thus letting the belt slip and
...squeal. I mash the accelerator a little harder when I hear it and it goes away. Or I can maintain constant pressure and the noise is continuous. So the noise is easily controlled by ...
893 questions posted
Usually answered in minutes!
545 Questions
532 Questions
469 Questions
339 Questions
340 Questions