1993 Jeep Wrangler "clutch adjustment" Questions

Ad

...adjustment, but check it anyway. - Ensure clutch throughout bearing is not carrying when clutch is out, i.e. when clutch is released, there is some 'play' in the pressure plate actuating arm at the ...

Ad

...clutch cable, you will see an adjustment nut, Turn right to tighten and left to loosen. HI. I HAVE 2 YJ's AND THERES NO WAY TO SET THEM UP. YOU NEED TO REPLACE THE CLUTCH, SORRY BUD. MNfisherman ...

Ad

Question about Jeep Wrangler

2 Answers

Clutch adjustment 95 Jeep YJ Is there a clutch adjustment on a 95 YJ with a 2.5L/5spd manual trans? no, there is no clutch adjustment. the clutch is hydraulic, and self adjusting, there are several ...

...get it in gear. Would like some suggestions. Check the clutch pedal height adjustment and free play at the pedal. Adjust clutch free play. Did you check the clutch fluid level? That solved my

...clutch during normal driving) or the adjustment is incorrect. The throwout bearing should not contact the pressure plate unless the clutch pedal is depressed when adjusted correctly. The constant ...

...gears Well, two possibilities. Clutch adjustment, or broken/bent parts. or #2 hydraulic issue (if yours is this type): prebleed master cylinder and then do not let it run dry again, or start ...

the linkage is hanging from the clutch pedal i think a snap ring came out but not for sure check the linkage to the clutch pedal then adjust try checking the snap ring for safety . and check the ...

2002 jeep wrangler recently had a new clutch put in,I am starting to have trouble putting it into 1st gear and shifting into 2nd, all other shifting fine.what could it be? Manual transmission shifting

I lost tension on my clutch pedal on my 97 I lost tension on my clutch pedal on my 4.0 97 Wrangler. I turned it off, and tension came back. Now I can only press it down about 80%. I can start it like ...

how do i bleed the clutch slave cylinder on a 95 jeep wrangler pump up clutch pedal really fast about ten times....leave it held to floor....open bleeder on slave cyl... repeat untill you have good ...

Not finding what you are looking for?
1993 Jeep Wrangler Logo

391 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...