1989 Jeep Wrangler "valve cover" Questions

...valve cover gaskets on my 1993 Jeep Wrangler? Seems to be seeping oil from the gasket area. Wrangler 6 cylinders engines are a straight 6 engine with only one valve cover. The gasket for the valve ...

...valve cover on 90 4.2l engine omit pcv valve use breather i am putting a brand new engine in my 1990 yj. i dont have the proper valve cover for it. Can i use an aftermarket 4.0 valve cover and omit ...

valve cover gasket replacement How do I replace a valve cover gasket on a 02 jeep wrangler 4.0 6cyl? Is the steering damper the same as the steering stabilizer shock? If I remember correctly, the ...

valve cover on the drivers side. Engine did run up to 3/4 toward hot but pulled over before it got to red. I know its not the water pump, radiator. I can pour water in the radiator and will run out of

valve cover and the snorkel of the metal frame goes to the carb,there is a bracket that has 4 bolts. two bolts that go into the top of the valve cover and two into the side bolts of the valve cover on

valve cover. Front is for pcv valve. What is the rear hole for? One at front usually goes to the air cleaner box...rear one is for pcv valve, but if cover was installed backwards they may be reversed.

...VALVE COVER GASKET LEAK! YOU CAN UNBOLT THE VALVE COVER, REMOVE IT, TAKE THE OLD GASKET OUT, CLEAN UP THE INSIDE, TO INSURE THERE IS NO OLD GASKET STUCK ON THE COVER! PUT THE NEW GASKET ON, AND ...

...the valve cover gasket, do you use as a sealant on a rubber gasket??? yes do not use a sealant on a rubber gasket...just make sure the cylinder head mateing surface for the valve cover gasket is ...

...valve cover gasket? It is also stalling out for no reason but starts right back up with no problem could this be because of the valve cover also? This could be due to your PCV valve ( positive ...

...valve cover into my air cleaner. I'm also leaking a little out of valve cover where the pcv valve plugs in. and I also have low compression in number 6 cylinder. Do you think this is a bad valve? ...