1989 Jeep Cherokee "front tires roar going down" Questions

...front. it sounds like a wheel bearron and or u joint going bad. is it very difficult to change and do I need specal tools to replace the wheel baerron and u joints. I have replaced the rear main oil ...

front end when going speed Do you have tires installed with directional tread? If you do they will have indicators (usually some type of arrow) indicating which direction the tires are to be installed

...Front tires are making a roaring noise while driving. Especially between 45 and 60 miles per hour Either the tires have slippe belts in them, mainly old or worn tires. Or more common is one of your ...

front differential. depending on the miles you have on this truck, the most likely areas i would look at would be the tires, u-joints/cv joints, and front and rear wheel bearings. thanks and good luck

...front pasenger side is making a roaring noise and car is shaking going down the road Here are areas to check ... wheel bearing, tire and wheel (defects/wear) ... something stuck in the wheel well

...front end roaring? I have a 98 Ponitac Grand Prix GT. Soon as you start going it starts roaring. Gets loader the faster you go till around 70 mph. When I am turning to the right a little while going ...

...front right side makes a grinding sound i just placed new tires on the car and then recheck the tires and even put on new ones they said it may be a wheel barring assembly what do you think I would ...

...tires make a diff noise. I would stick with tire noise. Unless you hear a ponounced clikcing noise when turning, it is not your CV joints. Wheel bearings are doubtful too; are you experiencing a ...

front end was "tight" but my tires were shot. I only had 40,000 miles on them, but I replaced the tires yesterday. The shaking continued. I brought it back in and had the U joints inspected along with

...front driveshafts as well - Other than that, I'd also inspect the brakes to ensure that the shoes were being held down properly and that the Universal joint is not worn - It sounds alot like either ...