...YJ, I have to put fluid in the clutch master cylinder, or else it wont shift. check for leak at the push rod for the clutch master under the dash and also the slave cylinder and replact the leaking ...
...YJ with a 2.5L/5spd manual trans? no, there is no clutch adjustment. the clutch is hydraulic, and self adjusting, there are several things that can go wrong with these. with normal wear the fluid can ...
yj. i cant put on gear when I start the engine. is that the clutch or is it something else. Check the clutch master cylinder, the line to the slave cylinder on the bellhousing and the slave for leaks.
slave cylinder in my 1988 yj wrangler. After bolting everything to gether i found out that the shifter will not move out of neutral. some one please help. Did u bleed the system to get rid of the air.
...the floor-no resistance at all-stuck in gear-does'nt this sound like the clutch master cylinder is out of fluid? No fluid leak in vehicle, so she says.Vehicle is 1991 YJ slave cylinder needs ...
YJ 2.5 with a clutch problem When I depress the clutch pedal to shift when starting out the pedal stays on the floor and then slowly, very slowly, comes back. There are no apparent leaks and the fluid
where is the slave cylinder in a YJ 89 wrangler jeep at the bell housing.
...YJ's AND THERES NO WAY TO SET THEM UP. YOU NEED TO REPLACE THE CLUTCH, SORRY BUD. MNfisherman <<< is 100% wrong! There is NO cable to adjust...It is controlled by a hydraulic clutch ...
Question about Jeep Wrangler
...yj wrangler fluid from the small reservoir (which has the brake fluid inside it for the clutch cylinder) is leaking on the inside of the vehicle firewall, subsequently draining the fluid on a daily ...
slave and throw out bearing. cant touch it with hands..... now ill pretend to be Carnak the magnificent,. https://upload.wikimedia.org/wikipedia/en/2/21/Carnac.jpg I open the envelope and see, what is
266 questions posted
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions