1988 Jeep Cherokee "remove oil pan 4x4" Questions

how do you get the oil pan out, when changing the oil gaskets on a 1988 jeep cherokee 4x4 probably have to remove the transmission pan first.

...a jack with a block of wood on the oil pan and jack up the engine till it stops, remove the two bolts and remove the wires, pulls up thru bracket and fender well, it's tight, but it will come

...remove the oil pan and check them all and if you have to replace the rings you'll need to remove the head to get the pistons out to put new rings on. Get a Haynes repair manual on the vehicle so you ...

...oil. Then remove the 2 remaining bolts and cover. The lid projects below the housing about 1/16" and that is the part of the lid you want to bump on to loosen the cover. 11. Rear disc brake caliper ...

...remove oil pan on a 2001 gmc Sonoma pick up truck to replace gasket I have a leak in my oil pan gasket and trying to replace it iv taken all the bolts out and lifted the motor but it still want come ...

...remove the engine mount bolts? 1993 GMC SONOMA 2.6 CYL V6 NOT 4x4 OIL PAN ... ? 2:31 https://www.youtube.com/watch?v=1KsRTlnW7Cg Sep 27, 2011 - Uploaded by JohnSmiths8379858 trying to reomove the oil ...

...Remove the oil pan. If the oil pan cannot be removed at this point you will have to remove the engine from the car. Once the oil pan is removed the oil pump can be replaced by removing the bolts on ...

...remove oil pan on 1987 chevy s10 2.8l 4x4 four speed in order to get the oil pan off of a 4 w/d model the front axle assy must be removed first then oil pan removal is straight forward after that. cv ...

remove oil pan 2003 4x4 1. Open the hood. 2. Disconnect the battery negative cables. 3. Remove the intake air assembly. 4. Remove the radiator shroud retaining bolts. 5. Install engine support fixture

...oil. Remove exhaust Remove left engine to transmission strut. Loosen the right side engine support bracket cushion thru-bolt nut and raise the engine slightly. Remove oil pan by sliding backward and ...