1988 Jeep Cherokee "jaws stuck" Questions

Ad

...stuck in ''up'' positio How do I "pop" the locking mechanism on the inside of the door so thedoor will latch close? The mechanism was accidentially pushed up in there so now thedoor will not hook on ...

Ad

...Stuck I have had the car for two years with no problems, until one day my driver side door started having problems closing all the way. Sometimes I would have to lock and unlock the door from the ...

Ad

...stuck in the lock position and will not release, help open the door and look at the 2 jaws that go around the strike. then pull the door handle as if you were opening it from the outside and manually ...

Question about Cars & Trucks

1 Answer

Broken off oil filter I don't know how you did that? The gasket is stuck to the filter housing I don't remember for sure but I believe the filter housing is bolted to the block, if so remove it to ...

...door latch stuck in shut/locked position; can't close the door since latch won't open to latch closed put a screwdriver in the latch jaws and force it open auto doors and radio have no power at ...

...Stuck. This can be because the Latch Mechanism is Seizing internally, [be liberal with a Penetrating Oil], or the Operating Link Rods internal to the door trim panels have become Stretched. To ...

...stuck bolts is leverage. What I mean is, the wrench you are trying to take it off with is not long enough. One to remove or break loose the bolt is by simple attaching a longer handle to your ratchet ...

Question about Jeep Cherokee

1 Answer

remove a stuck tie end tod The tie rod is a tapered fitted once the castle nut is off a pickle fork is beaten into the space between the rod and steering arm and falls out . no pickle fork then look ...

How to get radiator cap off when stuck or was put on wrong The radiator cap won't budge at all Use some large jawed pliers, like channel-lock pliers, on the side of the cap turning it ...

having trouble removing the steering damper on a '96 toyota landcruiser. Tried a two-jaw puller. Torqued down on it so tight that it left an indention on the end of the bolt. No result. Is the fitting

Not finding what you are looking for?
Cars & Trucks Logo

480 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Jeep Cherokee
1998 Jeep Cherokee

1,380 Questions

1999 Jeep Cherokee
1999 Jeep Cherokee

1,162 Questions

1995 Jeep Cherokee
1995 Jeep Cherokee

698 Questions

2000 Jeep Cherokee
2000 Jeep Cherokee

672 Questions

2001 Jeep Cherokee
2001 Jeep Cherokee

659 Questions

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...