1988 Jeep Cherokee "engine belt" Questions

...run the engine to check belt operation. Once the engine has reached normal operating temperature, turn the ignition OFF and check that the belt tensioner arrow is within the proper adjustment

cam belt 1998 cherekee cam belt, is it a belt or chain, 1998 cherekee hi this is a chain or gear driven engine all belt driven engines have plastic covers behind the accessories

engine, so i sprayed belt conditioner on my serpentine belt and it made the squeaking noise worse so i took the belt off and turned all the pulleys. All of them turned fine except the camshaft pulley.

...on in the same routing the old one was release pressure on the tensioner and run the engine until warm the belt will stretch and you will need to re adjust tension until about 1/24 of play is ...

...MY 1995 JEEP CHEROKEE COUNTRY, 4.0 ENGINE The belt is loosened and removed by loosening the power steering pump to relieve the tension of the belt to allow for removal. The belt diagram is like

engine with a failed belt or chain generally just spins much faster than normal when cranking. Since your engine overheated, I'd check the wires, cap and rotor to make sure all are dry. If coolant got

serpentine belt diagram for 1995 Jeep Cherokee Don't mind the art work,but it should get the job done. You did not mention the engine size, so I gave you the 4.0 L because it is the most common engine

...BELT OFF OF AN ENGINE THAT HAS NO A/C AND USE IT ON A ENGINE THAT HAS AN A/C IF I BY-PASS IT No for the configuration is totally different and will not fit. Get the correct belt for yours. If the AC ...

...break...a pully maybe locked up and caused it to burn the belt off....waterpumps and ac compressors are known to do that...if the new belt is gripping well it may keep the engine from turning

...belt it squeals when the engine is cold and the battery guage takes a while to build up amperage it also feels like the engine is bogging down when i drive it.i tried loosening it a little but when i ...