1987 Jeep Wrangler "reverse light switch auto trans" Questions

Ad

...But, if the reverse lights are on, make sure the neutral switch is adjusted properly before doing anything else...if it is, a contact inside the switch may be broken and bridging the reverse

Ad

...light switch on a 700 R4 transmission, lights will not go on and I do not see a switch on the trans anywhere I had the same problem. My backup lights wouldn't come on in when I put the auto. trans. ...

Ad

...light bulb connecter with reverse engaged(may have power at all times when key is on). Then check for ground when reverse is engaged-from bulb connecter to ground) with reverse engaged. The switch ...

Question about Jeep Wrangler

1 Answer

...reverse switch. both are located on the transmission. the m/t has 2 wires) the A./t about 6. (not 2) with those 2 facts, you can find it, counting wires. next time post trans type, so we dont have to ...

Question about Cars & Trucks

1 Answer

...reverse lights work off and on Probley loose connection in bulb socket or loose wiring if that looks good check neutral saftey switch for auto trans and sensor for maunual trans which shoukd be ...

...lights go on it's the switch (in the trans)... the problem is most likely the reverse light switch on the transmission. is this a manyual or auto, 1st picture is switch for manual, 2nd for

...direction. Please, anything you can help me with? replace the park\neutral safety switch it controlles the reverse lights auto trans ---manual trans replace the rev erse light switch rank my ...

...reverse lights on 2000 ford f450 7.3l auto trans All fuses and relays are good no power to lights tested with a test light. Traced wire all the way back nothing bare. Is there a back up switch on it ...

...reverse light switch . It's more than likely sticky or stuck. It is located on the transmission under the car. Inside the trans. Some cars have them in the shift linkage area in the shifter console . ...

...is an Auto trans, on the left side of the tranny just above the tranny pan is a switch. This is the reverse light switch, replace it. The switch screws into the side and has a 3 wire connector to

Not finding what you are looking for?
Cars & Trucks Logo

254 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...