...guess either a fuse, or your neutral safety switch is to blame. The fuse would most likely be the turn/bu fuse. The neutral safety switch is about a 20$ part and fairly easy to change. Thanks, ...
N D... ) to the ECU not energize import relay like ASD. Check for loose linkage to the transmission. + lube linkage with white Lithium grease spray. Check for loose wiring to the neutral safety switch
Question about Jeep Wrangler
...neutral safety switch? Cant register it with lite on Neutral safety switch sends a signal to the on-board computer to allow the engine to start and to engage the transmission When not replaced, ...
...neutral safety switch if it has one Thanks Click image for zoom... Fig. 1: Park/neutral position switch and manual lever The switch is mounted in the transmission and has no direct adjustment. Proper ...
...ok battery new relay ok Could be a bad connection between the battery and starter. Starter solenoid, or neutral safety switch if it is standard transmission. Check for power at the solenoid. ...
Where is the neutral safety switch in a 2002 Jeep Wrangler with automatic transmission? should be part of the prndl switch which is on the trans just behind where the linkage is fastened
...neutral two things to start with is the brake light switch? Do the brake light come on when pedal is pushed? No Replace brake light switch. Yes the replace netrual safety switch. Thats a start good ...
where is the location of the neutral switch where is the nuetral safety switch Side of transmission at linkages
When is my 2008 Jeep Wrangler jk neutral safety switch Is it easy to replace in the transmission,. and no.
...safety relay for the clutch pedal depression to allow start? 1994 Jeep YJ 4.0 this has happened twice If you find the switch, you can temporarily jump across it, 'till you get a new one. When you go ...
254 questions posted
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions