2004 Isuzu Rodeo "truck stays 4 wheel drive" Questions

...4 wheel drive light stays on and will not engage into 4 wheel drive on my 2005 rodeo With ignition key turned on ,but engine not running, press all 3,  4wd buttons at the same time and hold on ...

...drive it all you want, but it's yours till you fix it right. And you're paying for a rental till you fix it so the wheel stays on. Is it too much to ask for 4 out of 4 wheels to stay on ALL the

...stays on. Transfer case is working properly. SUV is definitely in 2 wheel drive. Is this a vacuum related problem If you jack up the tires on the front end and manually rotate the left side of front ...

4 Wheel drive (Manual trans) not engaging When I engage the 4 wheel drive (manual trans) I feel it going into gear yet it clicks in the transfer case as I drive and never engages staying in 2wd. Also,

...stays in 4 wheel ..what could be problem?? If you have tried shifting stopped and moving, then I'd say the transfer servo could be broken. It is the motor on the transfer case that shifts it in and ...

...wheel again it won't but shifts between 4 hi n 4 low the operators guide tells tells you, dont do that. its not AWD, its part time system. like jeeps. if not on ice or dirt stay out of 4wd. its only ...

wheel arch. Disconnect the 3 (black, green and blue colors) engine wire harness connectors from chassis harness of left rear side of compartment. Disconnect the cooling fan wire harness connector from

Light on 4 wheel drive but is still in 2 wheel drive. Press button on 2 wheel drive but light stays on 4 wheel drive. Computer says service 4 wheel drive Replace switch its bad.

...4 wheel drive push button flashes when pushed, it stays on solid when 2 wheel drive is pushed bad trasfer case selector motor common problem i ve a ton of these replace that motor and youll have 4 wd ...

...drive 3/4 ton Chevy.My truck will not lock into 4 wheel drive.The lock outs will not stay locked in. sometimes need to remove hub and clean grease out and lightly regrease. or may need to replace ...