2000 Isuzu Trooper "instrument cluster" Questions

Ad

...instrument cluster and at the back in the middle is a single phillips screw in a hole marked "KTV" I think. Unscrew and resccrew into the hole next to it also marked "KTV". That will reset the ...

Ad

Question about Isuzu Trooper

1 Answer

...instrument cluster and the other controls (AC/Heat) went out the other night while driving. I do not have anything that I can identify in the manual identifying a fuse for this set of lights, nor do ...

Ad

...instrument cluster. 2. Remove the tape from the hole marked "B" on the back of the instrument cluster. 3.Find the hole marked "A" and remove the screw from that hole. 4. Install the screw in the hole ...

Question about Isuzu Trooper

2 Answers

...instrument panel removal is a large task, check if the engine control computer is not reporting any faults with the vehicle speed sensor. If the PCM does not report trouble codes for the VSS the ...

...INSTRUMENT CLUSTER.. IF SO YOU KNOW YOUR COMPUTER IS POWERING UP... SECOND NEED TO KNOW WHAT IS MISSING...1...SPARK....FUEL OR INJECTION.. PULL ONE PLUG WIRE OFF COIL PACK HAVE SOME ONE CRANK CAR DO ...

...is the P,R,N,D,2,L lighting up in instrument cluster to display what gear your in? if its not working properly then range selection switch is faulty if these are ok more major trans internal ...

instrument cluster panel. As for finding out your codes meanings, go to your nearest public library and locate a 1990 Trooper service manual. Depends on the year of the vehicle. If it is a 96 or newer

Question about Isuzu Trooper

5 Answers

...instrument cell cluster. According to the circuit diagram this switch controls the power to the fuel pump. If I by pass the LPOS with a hot lead to the fuel pump the fuel pump activates and runs. ...

Question about Isuzu Trooper

1 Answer

...instrument cluster and have been advised it could be the GEM / BSI unit? Could you please advise me where to find it in my car so i can check for loose connections. Thanks The GEM has nothing to do ...

...instrument cluster to instrument panel. Rotate top of cluster outward. Disconnect the cluster harness connector. Remove instrument cluster from instrument panel. INSTALLATION Connect the instrument ...

Not finding what you are looking for?
2000 Isuzu Trooper Logo

409 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...