2000 Isuzu Rodeo "specs" Questions

i need torque specs for 94 rodeo does anyone have the torque specs for flywheel and clutch cover for the 1994 isuzu rodeo w/ v6 and 101/4 clutch?? flywheel 80-90 foot lbs (new bolts 90), press plate ...

Torque specs for 99 Isuzu rodeo intake manifold Torque spec for intake manifold 115 ft pounds per bolt

isuzu head bolt torque specs need head bolts torque specs 940 ft lbs each both head

...just rebuilt the engine on my 95 isuzu rodeo and when i set the timing marks according to facotry specs it will not start and sounds like the valves are open when the pistons reach the top of the ...

I need the schematics for a timing belt for a 1995 isuzu rodeo. 4wd, 3.2L 6cyl need to know how to install a timing belt and timing specs thank you. is it 2wd 3.2 cyl

how do i torque a harmonic balancer for a 1995 Isuzu rodeo Use a cross pattern and follow torque specs recommened in service manual, don't over tighten!

torque spec for pushrods on a 3.1 v6 engine Its not a torque spec the engine has hydrolic lifters and needs to be adjusted with a feeler gauge . Its called a valve lash adjustment its around 14 to 16 ...

...said it is a sensor but can not find part. First open drivers door and look for tire pressure specs then check all the tires pressures and inflate to the specs on door jam.This should make the ...

what are the head bolt torque specs for a 93 isuzu 3.2 v6 The specs.Are the m8 bolts 15 ft.lbs and the m11 bolts 47 ft.lbs.note:The m11 bolts cannot be reused and no oil on threads.

need timing gear allignment specs for 2000 rodeo 3.2 v-6 I recommend you get a Haynes repair manual on your model vehicle for these specs. It will provide you with illustrations on how to align the ...