...shift????? test the throttle position Have you retrained the gear? From memory think goes motor running foot firmly on brake park to neutral three times, neutral to reserve three times, neutral to ...
Question about Isuzu Rodeo
...shift safety switch at the park position to make sure it is still in place and working. Typically, if the vehicle won't start in Park or Neutral it is more likely to be the Transmission ...
...Some vehicles have one for neutral and one for park. Be sure to check your battery and starting system too. A weak battery or worn starter solenoid are also likely causes. Good luck and be
Question about Isuzu Rodeo
...shift auto it would start . now it wont start at all , i can hear a click sound coming from underneath any ideas? Park interlock switch bad Check by shifting the selector int neutral and see if it ...
Question about Isuzu Rodeo
...shift into any gear besides park or neutral. Car turns on just fine. When I shift into drive, reverse or a lower gear position and step on the gas pedal the engine revs but I don't move. It's as if I ...
...park neutral or drive revs way up then back down sometimes holding around 2 or 3 thousand rpm's. When the truck is having one of these tantrums it also shifts both up and down very hard slamming in ...
...shift lever on side of trans. (the PRNDL switch may be here) count the detent clicks., (easy huh?) to drive PRND bingo there. then attach the cable and get it to the Drive marker in the cab ...
Question about Isuzu Rodeo
shift the tranny into drive, but the gear indicator on the dash says I'm in neutral or reverse. I have to put it in park, turn the key all the way off, count to ten, and restart the car. Sometimes
Question about Isuzu Rodeo
...shift from park while running and the cruise control refused to release when i touched the brake. Is it a brake switch issue? It sounds like the neutral safety switch is bad need more info year make ...
Question about Isuzu Rodeo
...shift from park to any gear Cars have a locking solenoid that prevents the vehicle from being shifted out of Park when the engine is running if the brake pedal is not pressed. This is to prevent ...
1,196 questions posted
Usually answered in minutes!
832 Questions
814 Questions
720 Questions
623 Questions
547 Questions