2000 Isuzu Rodeo "know crank sensor bad" Questions

...know , the diag jumper, insert it then the crank engine and if the ecu sees EVEN 1 pulse missing in 10 it sets and stores a DTC, for that sensor , a fact, the ICM , does all spark cranking, so ICM ...

...crank (rare) but also depends on what country sold, , in the USA they had to move it, for misfire detection ! so where are you, or better to what country was the car sold to, new. called market. on ...

...know what exactly happens when you turn the key... it would not have been any hoses but more like ignition wires or sensor wires or maybe just pulled out a plug to the crank sensor.....it could be ...

...know that I also have an Isuzu Rodeo and that's what I would do. Get a mechanic to hook up a machine to it and check the entire engine out, then from there struggle to not get screwed over by any ...

...know if they did) checked all fuses.? checking CEL lamp glowing keyon, is it? if not find out why. i crank engine with scan tool , it shows no DTCs. no P03xx codes, 5seconds, cranked, did they do it ...

...know that 1/2 the cars
made, it must be cranked to get the pump to run..... right?
my second guess, is you dont own a $10 volt meter.
?
the engine has a ECU, this ECU sends 12vdc to the ...

...know your out come,and if this was help full. The AC compresser is likly as there isnt a clutch on the crank. with the AC off doesit charg OK? The Altentor needs to turn good and the belt may have ...

...know that the MAP sensor if it sees any air leaks the engine MUST race with full power, and not go lean. so what is it. as posted here the ISC is stuck open or any vacuum line on car leaking for ANY ...

spark from a pulled plug - - If the crank sensor is bad you will not get any spark. The PCM does not know the engine is turning with no crank sensor signal so it it does nothing. What else is it doing

...know what year is but the crank position sensor is locate it behind crank pulley in order to have acces to the sensor you ne to remove the pulley first. Note when the crank sensor is bad there should ...