2000 Isuzu Rodeo "drive shaft" Questions

...drive shaft the other is called a spline connecting drive shaft to throw out bearing you need to send out whole drive shaft to get replaced cause these require balancing they connect by u-joint if ...

...drive and all wheel drive. If it is not 4 or all wheel drive then there is no front shafts. You will need to remove the rear drive shaft though to remove the transmission. Hope this helps. Good

...drive shaft assembly (LH side). Lower the vehicle and disconnect the RH front drive shaft assembly, and then remove the front axle case assembly and front drive shaft assembly (LH). Front drive shaft ...

...drive gear on the output shaft of the transmission. you could have a bad driven gear that is the gear that is driven to create the electrical pulses to show a speed. the drive gear on some ...

...drive into the axle when the shaft going through the hub is over the balljoint it will lift out. Not as much work as it sounds. P.S. the brakes have to be removed also to get the hub out far enough ...

...faults here ,one is the drive shaft universal on the end of the drive shaft and the other noise ? well could be anything and without a good look and a wiggle with a 4ft crow bar i honestly couldnt ...

...does not come out of front diff unless you drop or remove whole front diff assembly will have to remove whole stub axle hub assembly to remove drive shaft from outer wheel stub axle (hub) ...

...drive shaft is outta ballance    if you do any off roading   you  may have  bent it hitting an object   or  could be something  like the diff ...

2000 Isuzu rodeo shudders when accelerating and in drive? what shudders the engine,drive shaft,or steering, sounds like universal join maybe not much to go on need more info

...drive shaft and a v6 engine. Has had one new rear drive axle instaled. Any ideas on what it might be and how to fix it? If the noise was not there before any work was done recently,then you may ...