1999 Isuzu Rodeo "forward gears" Questions

...FORWARD GEARS, BUT HAS REVERSE. CHECKED ON FLOW CHART, SHOWS FOWARD BAND USED ON FORWARD GEARS AND NOT REVERSE ALL OTHER COMPONENTS ARE USED FOR FORWARD AND REVERSE. First check you fluid level,if ...

...before the clutch can be successfully disengaged. Meanwhile, try rocking the vehicle backward/forward while shifting gearlever out of gear to get it into

...FORWARD GEARS. I RECENTLY REPLACED THE ENGINE. THE TRUCK WAS RUNNING GREAT AND THEN SLOWLY THE FORWARD GEARS STARTED TO SLIP.I HAVE TALKED TO A FEW DIFFERENT PLACES AND TWO OUT OF 7 ARE DIRECTING ME ...

izuzu rodeo drives forward on reverse gear auto trans or stick ill flip my quarter lands heads , auto. SHIFT lever is in reverse but car goes reverse so that means the shifter cable is bad. the sifter

i recently change my 2000 honda passport tanny and is not working forward i tried D 3 2 and L but only reverse is working You need to check the level of automatic transmission fluid in it. If ...

...in it send a sinal to what they call a neutral safety switch.that way the car or truck wont lunge forward if in gear.some toyota trucks have a dash bypass switch but i dont think your rodeo does ...

...I try to put it in gear (first or second since parked on slight declined street), it just drifts forward and does not engage. Last week I could barely make it up a steep hill taking daughter to ...

...two solenoids can produce all for forward gears.  For example both closed = 1st, solenoid A open and solenoid B closed=2nd, A closed and B open = 3rd, both open = 4th.  Best of luck to

my 99 rodeo occasionally jerks forward upon acceleration, but not every time. it may go a week or more without doing it and then start doing it again. help The first thing to check is the fluid, and ...

...behind the Hood release and yanking the cover off. This is how you gain access to the two forward most bolts on the steering column cover.) From hear you should  see the shift ...