1999 Isuzu Rodeo "egr" Questions

i have a code p0403 on my 2003 ford escape Hi,This is an issue w/the EGR system.The causes for a P0403 EGR code could be any of the following:Bad EGR solenoidExcessive resistance in control circuit ...

CODE P0401 COMEING UP I had an OBD II 401 code and fixed it by cleaning out the EGR vacuum line in the intake manifold. I removed teh EGR Valve and the set screw below it. i used a rifle cleaning ...

where's the EGR valve located on my 2002 Izusu Rodeo It's on the back off the motor in the middle passenger side. Disconnect the wire, unscrew two bolts then you have egr valve in your hand its that ...

code says bad egr valve replaced still throws code V6? 4cyl? what is the code? there is no code that says "replace egr valve", the passages may be stopped up. open the egr valve manually (a scanner ...

...the Mass Air flow sensor and solved my error codes P0172 and P0174. I am still getting a P0401 EGR error, so I replaced the EGR, but the engine light remain on. I have not gone to Autozone to ...

check engine light egr valve after deep cleaning the egr valve pipes the check eengine light came on when cruising down the rd. what else can I do to solve this problem. I stuck a dipstick down the ...

...I have a 2001 Isuzu Rodeo with the 4 cylinder engine. I am getting error code 401 which indicates EGR problem. I have replaced the EGR with a new one but still getting the code. I have cleared it ...

...circuit to positive---throttlecontrol unit---ECM code p0401 refers to exhaust gas recirculation(EGR) valve system---insufficient flow detected. ---causes hose leak/blockage--basic setting not ...

...same problem and it wouldn't pass the smog check.  I thought I'd have to replace the EGR valve but now know that would have not solved the problem.  The solution was to remove the ...

check engine light I have had my EGR vavle replaced and EGR valve tube replace but my check engine light still comes on for EGR vavle issue does a cars computer store the code and the memory has to be