1999 Isuzu Rodeo "change bulb" Questions

...change turn signal bulb on 1994 Isuzu Rodeo? Pull lens cover off. It's 4 screws. Then twist the plug out and push in, twist the bulb to pull it out. Then do reverse to put back in. Bulb size ...

...your hand behind the light unscrew it lefty loosing right tightly change the light bulb. The bulb has for low and High beam so the bulb has two elements when u take the old one u will see one is ...

How to install a rear brake light bulb on a 2004 Isuzu Rodeo The easiest way is to open back trunk open any coverings or carpet pull it back to gain access to the bulb socket once you see the socket ...

I am having a problem with my right tail light not working properly. When I turn on my right blinker the turn signal light and the break light both blink. When I press my break the light for the right

how do you change a brake light? Just pull off the lens housing with the 4 or 6 screws and pull the bulb out the back. Put in the same number bulb, you'll be all set. Hope this helps.

2001 rodeo check engine light does not come on at start up, Suspect the bulb needs to be changed. However the past two days it did come on at start up. But not this morning..? Idk wht to do. A light ...

...change the bulbs in my headlights? Both the high beams quit at the same time but the low beam still works.Fuse? Short? Or bad luck! Behind the headlight is a plug and a wire bracket I can't seem to ...

...change the bulb just like you would in a lamp in your house. Take it to your local autozone and they can help you get the right bulb for your car With any electrical problems its good to always check ...

...change said bulb (if that is the problem)? Take out the screws holding the instrument panel in, pull it gently away from the dash being careful not to unplug or pull out any wires. there should be a ...

Om my 92 Rodeo the back light is out. Do I have to replace the entire unit or can I just replace a bulb? just change the bulb