1992 Isuzu Trooper "timing marks" Questions

...timing marks are aligned, No.2 piston will be on Top Dead Center. 014RW003 Legend (1) Alignment Mark on Oil Pump (2) Groove on Crankshaft Timing Pulley (3) Alignment Mark on Crankshaft Timing Pulley ...

...timing belt I repaired a 3.1 4JG2 but the mechanic doesn´t know how to set the injection time. I can see the marks on the crank and camshaft as well as the inyection pulley but if I try to ...

...timing marks in each 4 camshafts. 1 punch mark and 2 punch mark. Sorry for the severe delay. I am personally going back to answer your unanswered question. I do not know if you still need the answer, ...

...timing belts you should start with the crank sprocket pointing at TDC and the cam sprockets pointing at their designated marks. You should be able to mark the old belt and and put corresponding marks ...

timing marks pulled camshafts to do valve job and need to align marks on drive gear and cams It's more to it than aligning the marks since the cam pulleys turn about three times or more to one turn of

timing marks trooper 1985 mod dlx turbo diesel Refer to Figures 1,2,3,4 when performing 17-step timing procedure for 1981-1985 Diesel Engines. Fig 1. Injection pump and camshaft alignment marks - ...

timing marks on a 3.1 td bighorn Only one timing mark which is on the main shaft. The injector pump and camshaft are timed with a bolt.. their is a small hole in the camshaft and injector pullys and a

how to timing the belt of isuzu 4jx1 before you remove belt time mark on cam gear as well as crankshaft pulley, the timming mark on the pump drive gear (lower gear in this picture) will not line up ...