2003 Honda Element "remove install starter" Questions

remove the starter unit without removing the intake manifold like many other people post out there. I am a Honda certified technician and always find ways to speed up my flat rate time when working on

install a starter? I see most come with some or all of the features. I am on a budget so the most economical approach is best. The Honda system so far has been solid so it might be a shame to chuck it

...remove the starter. To install: Place the starter into position and tighten the 2 lower retaining bolts to 15-20 ft. lbs (20-27 Nm). Place the starter cables onto the terminals and tighten the ...

...Remove the starter motor. INSTALLATION PROCEDURE Install the starter motor. Install the starter motor bolts. Tighten the starter motor bolts to 47 N.m (35 lb ft) Install the torque converter cover. ...

Remove or disconnect the following: Negative battery cable Air inlet tube Harness bracket Wiring at the starter Starter To install: Install or connect the following: Starter and torque the bolts to 60

...remove the starter. To install: Place the starter into position and tighten the 2 lower retaining bolts to 15?20 ft. lbs (20?27 Nm). Place the starter cables onto the terminals and tighten the ...

Remove the starter from the vehicle. To install: Raise the starter to the vehicle, then attach the wiring. Position the starter, then secure using the lower starter bolt. Tighten to 66 ft. lbs. (90 Nm

Install the components in the reverse order of removal. Maxima Remove or disconnect the following: Negative battery cable from the battery Air duct Harness protector from the harness Starter wiring at

...remove the starter.INSTALLATION 1.INSTALL STARTER Install the wire clamp to the wire bracket with the bolt. Torque: 9.81 N.m (98 kgf.cm, 84 in.lbf) Connect the starter wire with the nut. Torque: 9.81 ...

...Remove the starter. To install: Attach the connector to the terminal on the solenoid switch. Connect the cable from the battery to the starter and secure with the nut. Place the starter in the ...