Question about Chrysler PT Cruiser
...timing belt skipped a tooth due to wearMisalignment of timing belt/chainTone ring on crankshaft slipped/brokenTone ring on camshaft slipped/brokenBad crank sensorBad cam sensorDamaged wiring to ...
...timing belt and about 12 inches long, then roll them under the belt but over the timing gear they will grip and roll under. Plugs removed; rotate crank to proper crank position. Take your socket on ...
timing belt covers and check that you have not slipped a few teeth. If the PT has an interference engine (as I suspect), you may have bent some valves. If the timing belt is OK, do a compression test.
Question about Chrysler PT Cruiser
...timing belt but showed me it looked like new nice and tight So?? Next day went in again and the shop owner said the timing belt slipped a tooth and it would be 1500.00 to fix. The mech in front of me ...
...timing if way off, the chain or cam belt slipped. belts last 60k, period. B: The ECU many have ERROR to report, in fact any scan tool an monitor engine heat. and all these facts are considered Over ...
2001 PT Cruiser Serpentine Belt Diagram How do you loosen the tensioner to replace the large belt? I don't know if your serpentine belt layout is the same as mine. I have a 2005 2.4TD. I worked out ...
Question about Chrysler PT Cruiser
2007 Chrysler PT Cruiser. It idles okay but wants to stall unless floored, then it will take off with some stuttering. Okay so this car sat for three years when I bought it. First couple weeks it ...
Question about Chrysler PT Cruiser
...slips. belt tensioner could be weak . also your altenator bearing could be starting to go seize up. and maybe its just your belt is wore out .may be a cheap brand you replaced it with . first remove ...
will it damage the valves If you mean timing belt then yes, it could be possible. However these do not have a belt but rather a timing chain. These engines are not likely to have a timing chain go bad
JUST CHANGED BATTERY 2 WEEKS AGO AND RED BATTERY LIGHT JUST CAME ON BUT DOESNT STAY ON ALL THE TIME. WHAT COULD THE PROBLEM BE? Could be altrnator going out, Belt could be slipping due to a weak or ...
1,904 questions posted
Usually answered in minutes!
1,147 Questions
1,007 Questions
816 Questions
677 Questions
582 Questions